Get a free quote
Proudly made in USA. Patent 6,637,160
Proudly made in USA.
Facebook US Manufacture AquaShield insta aquashieldusa
(U.S. Serial No. 97071192)


Technical Info

Innovative Telescopic Design:

Aqua Shield™ has all the advantages of the traditional enclosures, but incorporates a telescopic design that allows one piece structural panels to slide under each other effortlessly, while maintaining a watertight seal and minimizing loss of heat generated by sun or water heater.

Sizes
Residential Low-Shield Model:

Widths available from 10 feet to 32 feet wide; length available from 14 feet to 100 feet. Ideal for both in-ground and aboveground pools and spas.

Residential High-Shield Model:

Widths available from 10 feet to 26 feet wide; length available from 14 feet to 100 feet. Ideal for in-ground or aboveground pool, spa or greenhouse use.

Residential Ellipse-Shield Model:

Widths available from 14 feet to 30 feet wide; length available from 14 feet to 100 feet. Also ideal for in-ground or aboveground pools and spas.

Commerical
Models:

Widths up to 34 feet, length up to 100 feet.

Components:
Structural Panels

US grade 6061-T6 aircraft quality aluminum alloy one piece seamless panels, precision engineered to open and close using our unique monorail tracking system. The enclosure is held simultaneously to the track by our "Safe Grip Track System", allowing for easy operation and added security during high wind and heavy snow load condition. Each panel 6'-10" long.

Vinyl Sweep

Each section includes a 2-inch Vinyl sweep that seals out drafts, and protects the interior of enclosure from dust, rain, insects etc. Sunroom model does not include a rain cap. We recommend you build one 10 to 12 inches wide.

Glazing

1) protects the exterior surfaces from damaging ultraviolet rays;

2) captures infrared light to create solar energy, thus increasing your pool's temperature by up to 20°;

3) is specially treated for antifogging to prevent condensation build-up and improve light transmission.

Anti Dust Sealer

Anti Dust Sealer will prevent mold, algae, dust and insects from entering the channels, ensure the clarity of multi-wall glazing.

It is moisture and temperature resistant and enables continuous drainage of condensation. (Available since March 2007)

Track

Reinforced, clear anodized aluminum tracks designed for smooth traction. You can open or close the enclosure in less than a minute. Our tracks provide security from high wind and snow load conditions, while remaining foot friendly.

Other

End panels:
Enclosure includes two end panels. One end panel comes with a 36 inch patio sliding door. Additional single or double sliding doors available.

End panels: Hardware & Fasteners:
Aqua Shield™ use only stainless steel and aluminum hardware and fasteners throughout the entire enclosure.

Specials and Promotions

Click here
Shipping
At AquaShield™ we take pride in our products and services.

That is why our specially trained personnel carefully pack each AquaShield™ onto the truck
ourselves, ensuring that it will arrive at your home or site in the same perfect condition that it
left our factory in.

In addition all shipments are fully insured.

Installation Pool Enclosure
Installation

Aqua Shield™ Telescopic Enclosure arrives fully assembled and is easy to install! It is recommended that the Aqua Shield™ Enclosure be installed on a flat surface of 3.5" thick reinforced concrete.

1. Mount track to ground surface.

2. Place sections on track.

Aqua Shield™ Hard Top Non Retractable Enclosure arrives fully assembled and is easy to install!

STEP 1

Layout and mark anchor locations

Hard Top Non Retractable Enclosure

STEP 2

Anchor Installation

Anchor Installation

STEP 3

Insert ground bracket and line up with anchor hole, then fasten with plastic head screw

Installation Pool Enclosure

Warranty:

Aqua Shield™ aluminum structure and polycarbonate glazing
is Warranty for 15 years.